Need to Program Your Marsflex TPMS Sensors? Here’s How to Get It Done Quickly and Easily!
Marsflex tire sensors are pre-programmed when they leave the factory, so there’s no need to reprogram them after installation. All you need to do is perform a simple relearn process using the OBDII method, which is the most stable and reliable way to get your TPMS system back to optimal performance. We highly recommend using a TPMS tool to complete the relearn process.
### **OBDII Relearn Steps:**
---
**Step 1: Verify TPMS Compatibility**
Make sure that the Marsflex TPMS sensors are compatible with your vehicle.
---
**Step 2: Install Sensors Correctly**
After installing the sensors, ensure that the tire pressures are adjusted to the vehicle’s placard values (usually found on the driver’s side door frame or in the owner’s manual).
---
**Step 3: Select Relearn Mode on Your Tool**
Select the relearn icon on your TPMS tool, then choose the make, model, and year of your vehicle.
---
**Step 4: Activate TPMS Sensors**
Activate the TPMS on each tire using the tool, starting with the left front tire. Hold the tool near the sidewall next to the valve stem. Repeat this process for the right front, right rear, left rear, and any full-size spare (if applicable).
---
**Step 5: Connect to OBDII Tool**
Now connect your TPMS tool to the vehicle using either the OBDII cable or a Bluetooth OBDII module.
---
**Step 6: Turn Ignition to "On"**
Set the ignition switch to the “on” position, but make sure the engine is off.
---
**Step 7: Follow On-Screen Instructions**
Follow the instructions on the tool’s screen to upload the sensor ID data to your vehicle's ECU. This will complete the relearn process.
---
**Step 8: Turn Off Ignition**
Once the tool shows the relearn is successful, turn the ignition off and then start the engine.
---
**Step 9: Drive the Vehicle**
Drive your vehicle at speeds over 30 mph for at least 10 minutes. This final step helps complete the sensor synchronization.
---
By following these steps, your Marsflex tire sensors will be successfully relearned, and your TPMS system will be fully operational once again.
If you have any questions or need assistance, feel free to reach out! Stay safe on the road with Marsflex! [Contact Us]
View Marsflex TPMS on Amazon: [Click]
View Marsflex TPMS on Website: [Click]